Ken Roberts
Supporter
I made a robust drain for both cars a/c systems. The passengers feet are in the same area so I felt the need to keep it tucked up tight. I have a foot rest and washer bottle mounted near by so it was important to mount the drain out of the way. I used some 1/2" aluminum tubing from McMaster Carr, oetiker clamps and epdm rubber hose. The tubing is held in the floor with a silicon grommet.
EPDM hose 9776T18
Aluminum tubing 9929T17
Silicone grommet 1061T39
Oetiker clamps 52545K73
EPDM hose 9776T18
Aluminum tubing 9929T17
Silicone grommet 1061T39
Oetiker clamps 52545K73
Last edited: