This post was meant for 2 weeks ago but I couldn't get pictures to upload:
Lots of stuff getting done that doesn't look like much but is all important.
The coolant lines have all been made, but I ran out of the wide smooth bolt hose clamps I use on silicone hoses so its not all hooked up yet. I hooked up the clutch line but the AN adapter I got for it was gouged (not sure when or how that happened) and sure enough it leaked.
But the axles are in, all the wiring is finished (just waiting to put in the distributor when I'm ready to fire it up (I'll prime the oil again right before I do that). I mounted the muffler (for the sake of the neighbors I won't start the engine until the exhaust is all hooked up.
So before I start it I need to: make the exhaust pipes, put heat shield boots on the spark plug wires, finish clamping the coolant hoses, fill coolant, check pump, hook up clutch line with new adapter, bleed, get the alignment right on the rear tires and then we'll find out what I've done wrong/forgotten.