hi guys i am new here and have a problem with my webers(quad 48 idf,s)
i have a holden 308(5 litre )heavillly modded around 450 hp
i have synchronized them all, float level is correct
the internals are as follows
40mm chokes
65 idle jets
f34 emulsion tubes
190 air correction jets
50 pump jet
160 main jets
at idle it pops and splutters,it will do this when acc slowly all the way to about 4500 rpm and then get a little better /ubbthreads/images/graemlins/banghead.gif,however if i throttle it hard it runs like a bullet and does not miss a beat. please help thanks glenn
i have a holden 308(5 litre )heavillly modded around 450 hp
i have synchronized them all, float level is correct
the internals are as follows
40mm chokes
65 idle jets
f34 emulsion tubes
190 air correction jets
50 pump jet
160 main jets
at idle it pops and splutters,it will do this when acc slowly all the way to about 4500 rpm and then get a little better /ubbthreads/images/graemlins/banghead.gif,however if i throttle it hard it runs like a bullet and does not miss a beat. please help thanks glenn