hi all,
i need help with the 302 windsor & audi 016 setup that i'm running in my cav gt40. the 302's standard, & the 5 speed audi box has the 3.89 final drive - my second one - same problem. my car revs too high & runs out of breath / gears. i only get 140 kph in 5th gear running at 6000rpm. some say it's ratios, some say i need to make a gear cluster change to the gearbox, & i'm even wondering if the problem's not with the motor. i haven't got a clue as to what's wrong or where to go. on paper i'm surposed to get about 250 kph, & i'm not close. have you ever come across a similar proble, & do you have any advice or solutions on where to go from here? finally, the clutch doesn't slip.
much appreciated.
regards.
joe.
you can reply to [email protected] or [email protected] (at home)
i need help with the 302 windsor & audi 016 setup that i'm running in my cav gt40. the 302's standard, & the 5 speed audi box has the 3.89 final drive - my second one - same problem. my car revs too high & runs out of breath / gears. i only get 140 kph in 5th gear running at 6000rpm. some say it's ratios, some say i need to make a gear cluster change to the gearbox, & i'm even wondering if the problem's not with the motor. i haven't got a clue as to what's wrong or where to go. on paper i'm surposed to get about 250 kph, & i'm not close. have you ever come across a similar proble, & do you have any advice or solutions on where to go from here? finally, the clutch doesn't slip.
much appreciated.
regards.
joe.
you can reply to [email protected] or [email protected] (at home)