Joel K
Supporter
Hi,
Just wanted to get some real world experience on the best approach to install the stock SLC fuel sender.
The manual states to do the following:
1)Make sure the flange is clean and threads are good
2)Do not use any sealant on the cork gasket
3)Torque the screws in a cross pattern to no more than 15 inch-pounds
Any other recommendations would be appreciated. Thanks!
Just wanted to get some real world experience on the best approach to install the stock SLC fuel sender.
The manual states to do the following:
1)Make sure the flange is clean and threads are good
2)Do not use any sealant on the cork gasket
3)Torque the screws in a cross pattern to no more than 15 inch-pounds
Any other recommendations would be appreciated. Thanks!