Brett James-McCall
Moderator
Thanks to Frank for getting me through a little wobble yesterday when.... the timing chain did not seal in a different place, grr. I won't be buying Victor Reinz gaskets again. The Fel-Pro ones hadn't had that problem.
Also had to tap ones of the holes out to a larger size, as despite re-tapping after years it appears it just turns now and that could have attributed to it. It's left quite a small area between the bolt hole and the water pump inlet area, but hopefully will be OK.
Frank has suggested doing away with the paper gaskets and sealing with something called 3 Bond, so that's winging it's way to me now...
Also had to tap ones of the holes out to a larger size, as despite re-tapping after years it appears it just turns now and that could have attributed to it. It's left quite a small area between the bolt hole and the water pump inlet area, but hopefully will be OK.
Frank has suggested doing away with the paper gaskets and sealing with something called 3 Bond, so that's winging it's way to me now...