I take way too many pictures, but I do share them even if pointless!
Added some stand-offs to my APR mirrors. They could be adjusted without them, but I didn't like the angle of them when looking at the car from the outside so with increase in height I believe I solved my issue. Anyone interested, here's info:
McMaster #93655A466
Male-Female Threaded Hex Standoff, 18-8 Stainless Steel, 8 mm Hex Size, 20 mm Long, M5 x 0.80 mm Thread Size
Always wanted a louder horn, just in case someone doesn't seem me and attempts to come in my lane. Remembered the other day I had this HornBlaster's motorcycle horn I ran on my busa many years ago, so pulled it out to verify it still works and test fit....couldn't ask for a better fit. Did some digging and InfinityBox should be fine to operate it without an additional relay. All outputs are 25a, max draw on horn is 18a and InfinityBox uses 14ga wire so everything checks out. Just need to verify fuse size used for it an swap out if needed.
My parents got me a pair of padded stands and windows will be a perfect use for them to keep from scratches while applying the insulation to the windows. You can see shade difference on the stands.