The rear frame I tried drawing twice and gave up because you need to do real life sometimes.
It will be 32mm and 25mm x 2 chrome moly, dont know what you guys pay but its $22 per meter.
So you dont want to start throwing it around.
My approach was 32 mm and 25mm electrical condute and a hot glue gun, condute $30.
I am glad I did because I did change my mind on a few things along the way.
I used the measuring table to get all the pick up points and I made them out of alloy sheet and glued them on as well.
It was well worth the days work as I resolved several issues before starting for real.
And yes guys it is a Subaru box, you remove the center diff and transfere gears out of the rear and bin them, you buy a splined sleeve and rear case that will loose about 200mm of the back.
link
Subarugears
The box cost me $250. You can buy diffs /gears/cv flanges ect ect.
The engine was $700.
I am going out off my way to be mean on this build.
Thats it, dosnt look much but it takes time.
Chassis weighed in at 56.2 kg.
jim