Rune
Supporter
I bleed and bleed , use 2psi valves to prevent backflow , but the brakes did not pass SVA . I use 4 pot calipers all around and 3/4 master cyl. I am about to change the master cyl for rear brakes to 5/8" due to the brakes was better than the front. I have moved the bias toward the front brake. This is more and less situation now.
How to get rid of the soft pedal? there must be air locked in somewhere. I was told to move the calipers down to lower level than the master cyl and bleed. Is this a idea?
I maked a cyl . hold 2 liter brake fluid and will connect to the suction side of master cyl. and it will be pressurised to 10-15 psi. Than easy to bleed alone.
But first of all I need good tips how to deal with the soft pedal.
How to get rid of the soft pedal? there must be air locked in somewhere. I was told to move the calipers down to lower level than the master cyl and bleed. Is this a idea?
I maked a cyl . hold 2 liter brake fluid and will connect to the suction side of master cyl. and it will be pressurised to 10-15 psi. Than easy to bleed alone.
But first of all I need good tips how to deal with the soft pedal.