These are Summit Racing part numbers, but they use Wilwood numbers after the prefix WIL.
You can look them up in the wildwood catalog if you leave off the WIL-
Rear
2 - Superlight 4 pot radial mount caliper 1.25 piston X 4 WIL 120-13232
1- HD Rotor 12.88 X 1.25, WIL-160-12784
1- HD Rotor 12.88 X 1.25, WIL-160-12785
2- Hat .290 offset, WIL-170-8919
Front
1- HD Rotor 13.06 X 1.25, WIL-160-12786
1- HD Rotor 13.06 X 1.25, WIL-160-12787
2- Hat .710 offset, WIL-170-10533
You will also need 48 grade 8, 1/4-20 X 1" socket head drilled screws (for safety wire) and four 3/4 X 3/4 X 5/16 steel standoffs. I got mine from McMaster Car.
Also Four 2.25 X 3/8 X 24 grade 8 socket head screws (caliper mount to adapter) From Fastenal.
These are also useful calculators for brake piston sizes and pedal pressure.
Dual Bias Calc.
Bias Calculator