Well that high stud might be a problem already, It has been very wet here in Taranaki for the last week and very humid and this has had the affect Jackmac spoke about way back when I started the body. Dam you Jack, always right!! The flat surfaces over the wheels have become a bit distorted, not a major but enough to be a problem. So how do I fix this?? fill the workshop with dehumidifiers? start a fire? or wait until next summer before I glass it up. One thing is for certain, the wood will definitely be coming out of this body. Having said that, the plywood seams OK so the doors are not affected, its the thin MDF I used on the top surfaces that have sucked up the moisture and distorted.
Anyway not to be held back I have now started on the wings. I have made Ply ribs with alloy stringers then a thin sheet of alloy will cover the frame work, I've done the front wing frame and hope to have the rear done over the weekend, the wings are 20" deep, the front is 36" wide and the rear is 76" wide. I know the width is right not so sure about the depth but it looks good so I'm happy with that, Hey, go big or go home, that's my moto. Photos soon.
Cheers Leon.