Brett, if your cable is too tight coming in from there rear whereas it was not too tight coming in from the side, you might want to reconsider the bellcrank strategy.
You could modify the bellcrank as shown in my modification below and achieve the same leverage/ratio. It would also greatly reduce the loading of the fulcrum bolt. I do agree that a bearing would be good, but a bushing of some sort would be sufficient if kept lubricated.
You could modify the bellcrank as shown in my modification below and achieve the same leverage/ratio. It would also greatly reduce the loading of the fulcrum bolt. I do agree that a bearing would be good, but a bushing of some sort would be sufficient if kept lubricated.