You know when you have been working on the car all day and it seems you have done nothing then some days it all comes together.
Well today it seemed to come together.
Putting parts on is the easy bit, finishing off is another.
Today I decided to finish off the nigly bits.
Also trial fitted a few bits.
Wheels arrived, look good but the powder coating was thick enough to stop the wheels sitting back correctly so started to rub back the centre, got them almost there and got worn out and fed up rubbing with scotch brite,, from the pictures below the clearances are tight, very tight.
The rear Brake lines are virtually finished, one fitting short.
All the brake and clutch lines are in Goodridge stainless steel with internal sleeves , this is acceptable for IVA tests.
Starting to look like a car now.