re: RF #12 "Race" Chassis
Hi Jim. Yeah, the problem is that because my steering arms mount on top of the control arm from the upright, the taper didn't suit at all. This hole was then reamed out in that direction, effectively reversing the cone shaped hole. I tried just about every possible tie rod end available without success.
Happily, problem has been solved, and now allows me even more adjustment down there!
Hi Jim. Yeah, the problem is that because my steering arms mount on top of the control arm from the upright, the taper didn't suit at all. This hole was then reamed out in that direction, effectively reversing the cone shaped hole. I tried just about every possible tie rod end available without success.
Happily, problem has been solved, and now allows me even more adjustment down there!