That's a nice looking head-unit and the dimensions look like it will fit the center binnacle.
If this will be a street car, you will need a rear-view camera. Will this unit display a rear view camera?
There is really quite a lot you can do while waiting for your kit to arrive, that will significantly shorten your build time. In fact, the first 37 pages of my
SLC Car Builder Journal discuss what you can be doing right now. For example, pull together your drive-train and have it ready when your kit arrives. This alone can keep you occupied for the next month or so. You will need to buy an engine, buy a transaxle, buy the clutch, pressure plate, flywheel combination to marry it all together. Then perform modifications to the engine such as reversing the intake manifold, probably modify the accessory drive to re-position the alternator, modify the water pump outlet, modify the engine electrical harness or buy a new one, get the ECU flashed, start building the exhaust header, etc. By doing the above while waiting, I had my complete drive train installed within a week after my kit arrived and started it in the first month.
Scared yet...Don't be. Its a lot to do, but its fun and people on this forum are here to help.
Here is a link to my ->
SLC Car Builder Journal
BTW, the reason I made it a Kindle ebook is that its well over 300 pages with 500+ photos and expensive to print.
Good luck on your SLC!